Does anyone have the wiring diagram for the headlight and the hight / low switch on a 13 DX? I found the one for the blinkers via the googles, but did not see anything for the headlight.
My high beam recently stopped working. I changed bulbs, then verified that the old bulb and the new bulbs were working.
I took the side cover off and checked all the pins in both connectors and every thing looks fine and is making solid connections. I took the light off and verified those connections as well. I took the left hand control box apart and made sure the switch looked ok, couldn't really do much more than look at it.
I used a voltmeter at the light bulb connector and its not getting power there.
Is there a way I can use a voltmeter to check if the switch is working?
Should I just replace the switch? Any other suggestions?
My high beam recently stopped working. I changed bulbs, then verified that the old bulb and the new bulbs were working.
I took the side cover off and checked all the pins in both connectors and every thing looks fine and is making solid connections. I took the light off and verified those connections as well. I took the left hand control box apart and made sure the switch looked ok, couldn't really do much more than look at it.
I used a voltmeter at the light bulb connector and its not getting power there.
Is there a way I can use a voltmeter to check if the switch is working?
Should I just replace the switch? Any other suggestions?