Had a minor mishap last November from someone coming toward me on a one way street, resulted in the bike being laid down and skidding a few feet along bike's right side. I walked away ok, but bike needed some work.
Took this as an opportunity to put a bit more money into the project and really get my dream VRod out of the situation, sharing as last picture =). Spent the winter searching for the right parts to replace the OEM, and offering the whole lot of slightly damaged and undamaged parts here.
Really not sure what to ask for this, will start asking $500+S&H for the lot, or message with a reasonable offer, happy to help anyone in need. I just don't want to be sending out many little packages for a long time and trying to do this piece meal. Attached is a picture of all of the pieces I have together, link below has detail pictures of each piece:
LINK TO DETAIL PICTURES:
https://www.dropbox.com/sh/mn0x1582b...tB1fsXq9a?dl=0
Going to guess that the whole lot weights probably around 50 lbs.
BIKE DETAILS:
- 2003 Anniversary VRSCA, anodized aluminum
- Had 19,000 miles at the time of accident
DAMAGED PARTS INCLUDED:
- Anniversary Super Sport Windshield (scrapes on plastic, emblem in good condition, all mounting hardware fine)
- Dealer owes me back the airbox cover, anodized aluminum (minor dents and scrapes from going down, removed emblems to put on new cover) (still need to confirm they haven't done away with this somehow)
- Dealer owes me front fender, anodized aluminum (still need to confirm they haven't done away with this somehow)
- Mirrors (right cracked)
- Handlebars (slightly bent)
- Right handlebar master cylinder, powder coated (scraped)
- Right hand grip, black rubber
- Right front turn signal
- Right rider foot peg, black rubber, & clevis
- Right brake foot pedal
- Passenger sissy bar
- Exhaust pipes
- License plate & rear turn signal bracket, black plastic (minimal damage)
UNDAMAGED PARTS INCLUDED:
- Switch housings, powder coated
- Clutch bracket for left handlebar, powder coated
- Left hand grip, black rubber
- Left rider foot peg, black rubber, & clevis
- Passenger foot pegs, black rubber
- Tail light
- Jiffy stand, powder coated
- Fork sliders, powder coated
- Shifter foot lever
- Clutch cover
- Upper belt guard, black powder coated? (has some rubbing from accessory pouch mounted above)
- Lower belt guard, black plastic
- Headlamp bulbs (2)
- Turn signal bulbs (4)
- Misc bolts and clamps
Thanks!
Took this as an opportunity to put a bit more money into the project and really get my dream VRod out of the situation, sharing as last picture =). Spent the winter searching for the right parts to replace the OEM, and offering the whole lot of slightly damaged and undamaged parts here.
Really not sure what to ask for this, will start asking $500+S&H for the lot, or message with a reasonable offer, happy to help anyone in need. I just don't want to be sending out many little packages for a long time and trying to do this piece meal. Attached is a picture of all of the pieces I have together, link below has detail pictures of each piece:
LINK TO DETAIL PICTURES:
https://www.dropbox.com/sh/mn0x1582b...tB1fsXq9a?dl=0
Going to guess that the whole lot weights probably around 50 lbs.
BIKE DETAILS:
- 2003 Anniversary VRSCA, anodized aluminum
- Had 19,000 miles at the time of accident
DAMAGED PARTS INCLUDED:
- Anniversary Super Sport Windshield (scrapes on plastic, emblem in good condition, all mounting hardware fine)
- Dealer owes me back the airbox cover, anodized aluminum (minor dents and scrapes from going down, removed emblems to put on new cover) (still need to confirm they haven't done away with this somehow)
- Dealer owes me front fender, anodized aluminum (still need to confirm they haven't done away with this somehow)
- Mirrors (right cracked)
- Handlebars (slightly bent)
- Right handlebar master cylinder, powder coated (scraped)
- Right hand grip, black rubber
- Right front turn signal
- Right rider foot peg, black rubber, & clevis
- Right brake foot pedal
- Passenger sissy bar
- Exhaust pipes
- License plate & rear turn signal bracket, black plastic (minimal damage)
UNDAMAGED PARTS INCLUDED:
- Switch housings, powder coated
- Clutch bracket for left handlebar, powder coated
- Left hand grip, black rubber
- Left rider foot peg, black rubber, & clevis
- Passenger foot pegs, black rubber
- Tail light
- Jiffy stand, powder coated
- Fork sliders, powder coated
- Shifter foot lever
- Clutch cover
- Upper belt guard, black powder coated? (has some rubbing from accessory pouch mounted above)
- Lower belt guard, black plastic
- Headlamp bulbs (2)
- Turn signal bulbs (4)
- Misc bolts and clamps
Thanks!