New H-D rider reach seat 07-11 VRSC models

November 18, 2016, 5:38 am

≫ Next: FS: (UK or EU) Brand new boxed 72t rear pulley and bearing

≪ Previous: Used 12mm ARP head studs

$

0

0

51781-07
Reach Seat. Fits '07-'11 VRSC™ models (except VRSCF and VRSCR). Requires use of Original Equipment passenger pillion or Touring Passenger Pillion P/N 51780-07. Seat width 13.0". Moves you 1.5 inches forward, narrower in thigh area to shorten the reach to the ground. Brand new seat, never installed. $239.95 new price, $175. shipped in USA.

Attached Images

	IMG_8057.jpg (246.4 KB)
	IMG_8058.jpg (235.5 KB)

---

FS: (UK or EU) Brand new boxed 72t rear pulley and bearing

November 18, 2016, 7:13 am

≫ Next: Vrod Muscle 2012 tank to Vrscr 2006

≪ Previous: New H-D rider reach seat 07-11 VRSC models

$

0

0

** Now Sold - thanks **

Completely new and boxed rear pulley and bearing for wide tyre V-Rods.

Postage may be expensive outside EU, price paid and part numbers below. Open to offers over £150 + shipping at cost (for both together)

SPROCKET, MACH, BLACK, 72T
SKU: 40590-07 £238.26 1 £238.26

BALL BEARING, HI-CAP/DBL ROW
SKU: 9254 £38.99 1 £38.99


Would suit someone wishing to customise/machine their rear pulley, so you have a brand new spare to work on, or if you just need replacement at near 1/2 dealer price

Vrod Muscle 2012 tank to Vrscr 2006

November 18, 2016, 10:52 am

≫ Next: Badlander Seat 02-06

≪ Previous: FS: (UK or EU) Brand new boxed 72t rear pulley and bearing

$

0

0

Hi. It is possible to put from muscle 2012 tank to Vrscr 2006 model? Thanks

Badlander Seat 02-06

November 19, 2016, 9:27 am

≫ Next: WTS V-Rod Windshiled bag New

≪ Previous: Vrod Muscle 2012 tank to Vrscr 2006

$

0

0

New never used $175

Attached Images

	Vrod Badlander 1.jpg (416.9 KB)
	Vrod Badlander 2 copy.jpg (488.0 KB)

WTS V-Rod Windshiled bag New

November 19, 2016, 9:32 am

≫ Next: 2006 VRSA with 240 Rear $8500

≪ Previous: Badlander Seat 02-06

$

0

0

Never used $65

Attached Images

vRod Windshield bag new.jpg (283.6 KB)

2006 VRSA with 240 Rear $8500

November 19, 2016, 3:07 pm

≫ Next: Fs: V-rod 5 spoke wheel- black ice harley-davidson

≪ Previous: WTS V-Rod Windshiled bag New

$

0

0

2006 VRSA with lots of extra chrome. 2 into 1 Rinehart exhaust. 240 Rear with chrome swingarm. Chrome belt guard and pulley. HD chrome wheels, Chrome engine covers, chrome pegs, Pirelli Night dragon tires have less than 1,000 miles on them. New Lithium battery last year.HID headlight, Power commander, 7,994 miles on this beautiful bike. Also includes an HD detachable windshield. AMSOIL is all I run. Includes CD service manual also. Will deliver within 100 miles of NW Pa 16316. Brandon 412-589-0093

Attached Images

	IMG_6170.JPG (134.2 KB)
	IMG_6163.JPG (143.9 KB)
	IMG_6164.JPG (143.8 KB)
	IMG_6167.JPG (138.3 KB)
	IMG_6169.JPG (143.4 KB)
	IMG_6171.JPG (127.7 KB)
	IMG_6165.JPG (134.1 KB)
	IMG_6166.JPG (126.2 KB)
	IMG_6172.JPG (80.3 KB)

Fs: V-rod 5 spoke wheel- black ice harley-davidson

November 19, 2016, 6:13 pm

≫ Next: VROD Cooling

≪ Previous: 2006 VRSA with 240 Rear $8500

$

0

0

Front and rear rims only. Tires not included. $800.

https://goo.gl/images/6IcVgR

Attached Images

	IMG_9049_1479607832336.JPG (718.3 KB)
	IMG_8389_1479607875805.JPG (3.12 MB)
	IMG_8390_1479607906774.JPG (2.20 MB)

VROD Cooling

November 20, 2016, 1:41 pm

≫ Next: Custom Cycle Control System/Climax

≪ Previous: Fs: V-rod 5 spoke wheel- black ice harley-davidson

$

0

0

1. Does the radiator cooling fan run all the time?

2. I am leaking radiator fluid around the cap. It appears that the vent hole is not draining excess fluid? When I open the cap fluid is sitting in vent hole area not draining. Is that a vent hole? Can I blow air through it to make sure it is not plugged?

3. I have ordered a new cap in case that is the problem, will have to wait one week for it to arrive.

VROD Experts please chime in.

Thank you!

---

Custom Cycle Control System/Climax

November 20, 2016, 4:00 pm

≫ Next: FS: Electric Harley V-rod 2002, Custom Motorcycle Chopper Batpod

≪ Previous: VROD Cooling

$

0

0

Hello,
I have been doing some research into these fantastic controls to fit to my 2012 VRSCDX with ABS. They have a drag bar in black which looks great.

http://www.customcyclecontrols.com/i...prod/prd50.htm

I inquired with CCCS about ABS and twin brake compatibility and they didn't know? go figure!

I know there is a couple of members that distribute this product and was wondering if they or anyone else has had any experience with it being fitted to a Nightrod with ABS.

I'm also looking for any stock that's black.

Thanks again.

FS: Electric Harley V-rod 2002, Custom Motorcycle Chopper Batpod

November 21, 2016, 3:15 am

≫ Next: Rear motor mount

≪ Previous: Custom Cycle Control System/Climax

$

0

0

This custom bike is 100% electric, and is built around a modified 2002 Harley Davidson V-Rod frame. It is a unique, one-of-a-kind motorcycle that is fully operational and a totally reliable form of transportation. Although the VIN history will show higher mileage (due to the previous original engine), this completed project has less than 150 miles on it since it was rebuilt into an electric bike. Most of these miles were required for development & testing.

Most of these parts were custom made from raw aluminum and steel stock material. Many other components, such as the wheels, fork tubes, braking systems, etc were taken from other bikes and incorporated into this custom design. The bike is currently titled, registered, & insured as a street-legal 2002 Harley V-Rod due to the VIN that is stamped on the frame neck. It has a clear Title as such.

The motorcycle is in immaculate, flawless, clean condition. No road grime, grease, stains, or dirt at all. The motorcycle will be "ready to ride" upon delivery, with the battery pack fully charged. Due the the electric drive system, it is very quiet and stealthy. Roll it off the crate base, flip a switch, twist the throttle grip, and you're heading down the road

Asking for $9600 shipped.

Thanks

Rear motor mount

November 21, 2016, 5:53 am

≫ Next: Topless conversion

≪ Previous: FS: Electric Harley V-rod 2002, Custom Motorcycle Chopper Batpod

$

0

0

Guys,

I need to replace my rear motor mounts. Is it necessary to put the engine out of the frame (as the manual describes) or is there some work around to avoid this?

Thanks,
Raimund

Topless conversion

November 21, 2016, 11:14 am

≫ Next: Wanted Silver risers etc for B riser swap

≪ Previous: Rear motor mount

$

0

0

Hey guys,

Recently purchased 2015 VROD Muscle - my first bike so I'm new to it. It's 1.000 miles and almost new consition. It already has 2-in-1 Vance and Hines exhaust, and I'v been advised to make topless conversion. Can you please guve me knsight on it: what is it exactly? How I do it? What are the side effects?
Would appreciate any help and advise.
Thanks

Wanted Silver risers etc for B riser swap

November 21, 2016, 12:57 pm

≫ Next: Bassani Road Rage 2>1 VRod Black ’07-11 Exhaust

≪ Previous: Topless conversion

$

0

0

Looking for the following to convert my new to me 03 to the B riser setup.
pt# 55989-04 Silver bar clamp
pt# 55990-04 Silver Risers
pt# 46150-04 Silver instrument housing
pt# 67591-04 silver/chrome Instrument Bezel
looking to see if anyone has some of these parts collecting dust.
Thanks Smkblwr

Bassani Road Rage 2>1 VRod Black ’07-11 Exhaust

November 21, 2016, 4:42 pm

≫ Next: FS: NIB Sprintex Supercharger

≪ Previous: Wanted Silver risers etc for B riser swap

$

0

0

Full Bassani exhaust system w/ceramic black heat shields & collector. Two end caps, black & chrome, system has less than 1000 miles, bought new in spring ’16. Comes with muffler hanger & all hardware, one muffler clamp needs replaced, couple of scratches on the bottom side. $375

Attached Images

	20161029_163214.jpg (469.1 KB)
	20161120_114044.jpg (232.0 KB)
	20161120_114117.jpg (196.5 KB)
	20161120_114316.jpg (175.6 KB)
	20161120_113920.jpg (271.2 KB)

FS: NIB Sprintex Supercharger

November 22, 2016, 12:54 am

≫ Next: 03 Front Brake Line Assembly

≪ Previous: Bassani Road Rage 2>1 VRod Black ’07-11 Exhaust

$

0

0

Brand new (improved version) Sprintex Supercharger Kit.

This was purchased as part of the group buy that RSC put together back in January. It has only been opened up to inspect and review the instructions. Everything is in perfect condition.

Will sell for $3500 shipped

Thanks

---

03 Front Brake Line Assembly

November 22, 2016, 3:58 am

≫ Next: 03 Harley Davidson V-Rod Rear Fender Anodized Anniversary

≪ Previous: FS: NIB Sprintex Supercharger

$

0

0

I need the front brake line assembly for an 03 Vrod. bought the bike from a guy in Jersey and they're a little rusty... Anybody partying one out??? I might also be interested in the clutch cover, driver seat, chrome rear fender (can trade for brand new brushed aluminum)

03 Harley Davidson V-Rod Rear Fender Anodized Anniversary

November 22, 2016, 4:52 am

≫ Next: Sticking Throttle

≪ Previous: 03 Front Brake Line Assembly

$

0

0

I stole this pic from Google... Mine is brand new in the box. The box was opened and just partially unwrapped. I just acquired the bike and fender, not sure what he paid for it but I saw one on ebay for $249...
I'd certainly sell it for that price OBO but I'd mostly rather trade for a Chrome fender with tail light. I'd also wheel and deal on a front brake line assembly, and chrome clutch cover for an 03
I'd also be open for trading this fender and my chrome tank cover for a set of painted tins... I can even include the fender that's currently on the bike but the chrome is pitted/flaking.

Feel free to email me for quickest response 19mikek79@gmail

Sticking Throttle

November 22, 2016, 5:52 am

≫ Next: VRSCDX Import to UK - Speedo question

≪ Previous: 03 Harley Davidson V-Rod Rear Fender Anodized Anniversary

$

0

0

I just picked up an 03, it sat outside for quite a while with very little use, the bike only has 12,000 miles on it. Other than some serious cleanup, my only issue is that the throttle is sticking a bit. Can the throttle cable be lubed? Could it be something other than the cable?

I do detect a slight random miss when its idling, I'm going to run all the gas out, replace with fresh, change plugs and wires, change oil... Any other suggestions?

VRSCDX Import to UK - Speedo question

November 23, 2016, 3:33 am

≫ Next: Has anyone moved the electronics from under the seat?

≪ Previous: Sticking Throttle

$

0

0

Hi guys

I'm importing my NRS to the UK from the Middle East. Part of the process is to change the Speedo from Kmh to Mph.

I understand that there is an insert that you can add to the existing speedo.

Does anybody have experience with this? Is it easy? Is it still waterproof etc?

Any advice/information will be gratefully accepted!

HG

Has anyone moved the electronics from under the seat?

November 23, 2016, 4:10 am

≫ Next: Complete NLC body kit - price lowered for quick sale

≪ Previous: VRSCDX Import to UK - Speedo question

$

0

0

I am wanting to move all of the electronics from under the rear seat of my 2013 Vrod Muscle so I can have a little storage space. Does anyone have any pictures to share of where and how they moved everything? I greatly appreciate any assistance! Thank you!